NOTICE: This package no longer exists in Ports


./lang/python/2.4 [interpreted object-oriented programming language]

[ CVSweb ] [ Homepage ] [ RSS feed ]

Version: 2.4, Package name: Python-2.4.6
Maintained by: Damien Miller
Master sites:
Description-bsddb
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains the bsddb, for using the Berkeley DB library in
Python.

Description-gdbm
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains the gdbm, for using the GNU DBM library in
Python.

Description-idle
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains IDE for Python.

Description-main
Python is an interpreted, interactive, object-oriented
programming language that combines remarkable power with
very clear syntax. For an introduction to programming in
Python you are referred to the Python Tutorial. The Python
Library Reference documents built-in and standard types,
constants, functions and modules. Finally, the Python
Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules
written in C or C++. On most systems such modules may be
dynamically loaded. Python is also adaptable as an
extension language for existing applications. See the
internal documentation for hints.

Description-tests
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains the Python testsuite.

Description-tkinter
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains the Tkinter module, for using the tk toolkit
in Python.

Description-tools
Python is an interpreted, interactive, object-oriented programming
language that combines remarkable power with very clear syntax. For
an introduction to programming in Python you are referred to the
Python Tutorial. The Python Library Reference documents built-in
and standard types, constants, functions and modules. Finally, the
Python Reference Manual describes the syntax and semantics of the
core language in (perhaps too) much detail.

Python's basic power can be extended with your own modules written
in C or C++. On most systems such modules may be dynamically loaded.
Python is also adaptable as an extension language for existing
applications. See the internal documentation for hints.

This package contains extra tools that Python users may find useful.

MESSAGE-main
If you want to use this package as your default system python, as root
create symbolic links like so (overwriting any previous default):
ln -sf ${PREFIX}/bin/python2.4 ${PREFIX}/bin/python
ln -sf ${PREFIX}/bin/pydoc2.4 ${PREFIX}/bin/pydoc


MD5: dWSysUKxuDRc1TWLeqqkgg=
RMD160: qF+kAFXMBVJgYfKz5nD8LjDr47A=
Filesize: 9326.336 KB

Package available on: cdrom(), ftp()
Distfile available on: cdrom(), ftp()

Version History (View Complete History)
  • (2009-01-02) Updated to version: Python-2.4.6
  • (2007-04-13) Updated to version: Python-2.4.4
  • (2006-11-02) Updated to version: python-2.4.4
  • (2006-10-11) Updated to version: python-2.4.3p1
  • (2006-08-02) Updated to version: python-2.4.3p0
  • (2006-07-21) Package added to openports.se, version python-2.4.3 (created)
[show/hide] View available PLISTS (Can be a lot of data)

CVS Commit History:

   2011-07-18 09:32:18 by Christian Weisgerber | Files touched by this commit (9)
Log message:
fix build after after 4.9->5.0; with help from rpointel@
   2011-07-18 09:32:18 by Christian Weisgerber | Files touched by this commit (9)
Log message:
fix build after after 4.9->5.0; with help from rpointel@
   2011-07-18 09:32:18 by Christian Weisgerber | Files touched by this commit (9)
Log message:
fix build after after 4.9->5.0; with help from rpointel@
   2011-07-09 03:43:59 by Jasper Lievisse Adriaanse | Files touched by this commit (2)
Log message:
fix prev.
   2011-07-09 03:43:59 by Jasper Lievisse Adriaanse | Files touched by this commit (2)
Log message:
fix prev.
   2011-07-06 06:25:29 by Jasper Lievisse Adriaanse | Files touched by this commit (3)
Log message:
regen
   2011-05-30 15:11:44 by Remi Pointel | Files touched by this commit (8)
Log message:
Correct the wrong value of LDFLAGS (certain ports will need WANTLIB += ${MODPY_WANTLIB}).
Thanks for fgsch@ for his patch-Modules_selectmodule_c to correct SIGBUS error on sparc64 (test_kqueue.py).
It's time make bulks of Python2.7 on as many archs as we can.
Thanks a lot.
ok sthen@ aja@
   2011-05-07 03:36:17 by Federico G. Schwindt | Files touched by this commit (5)
Log message:
Security fix for CVE-2011-1521.
prodded and ok jasper
   2011-05-07 03:36:17 by Federico G. Schwindt | Files touched by this commit (5)
Log message:
Security fix for CVE-2011-1521.
prodded and ok jasper
   2011-05-07 03:36:17 by Federico G. Schwindt | Files touched by this commit (5)
Log message:
Security fix for CVE-2011-1521.
prodded and ok jasper
   2011-05-07 03:36:17 by Federico G. Schwindt | Files touched by this commit (5)
Log message:
Security fix for CVE-2011-1521.
prodded and ok jasper
   2011-05-07 03:36:17 by Federico G. Schwindt | Files touched by this commit (5)
Log message:
Security fix for CVE-2011-1521.
prodded and ok jasper
   2011-04-12 13:28:13 by Matthias Kilian | Files touched by this commit (7)
Log message:
Whenever a package installs a script using #!/usr/bin/env, god kills
a kitten.
Let pydoc${VERSION} use #!${LOCALBASE}/bin/python${VERSION} instead
of $!/usr/bin/env python${VERSION}.
ok rpointel@, sthen@ (after some discussion wether post-build is
the proper target for this or not)
   2011-04-12 13:28:13 by Matthias Kilian | Files touched by this commit (7)
Log message:
Whenever a package installs a script using #!/usr/bin/env, god kills
a kitten.
Let pydoc${VERSION} use #!${LOCALBASE}/bin/python${VERSION} instead
of $!/usr/bin/env python${VERSION}.
ok rpointel@, sthen@ (after some discussion wether post-build is
the proper target for this or not)
   2010-11-15 13:55:25 by Stuart Henderson | Files touched by this commit (7)
Log message:
use tk.port.mk and move -tkinter to a more recent version of Tcl/Tk.
reads fine to fgsch@
   2010-11-15 13:55:25 by Stuart Henderson | Files touched by this commit (7)
Log message:
use tk.port.mk and move -tkinter to a more recent version of Tcl/Tk.
reads fine to fgsch@
   2010-10-28 02:22:11 by Federico G. Schwindt | Files touched by this commit (4)
Log message:
Simplify and switch to REVISION.
From Alexandr Shadchin (firstname dot lastname at gmail dot com).
martynas@ ok.
   2010-10-18 13:20:42 by Marc Espie | Files touched by this commit (54)
Log message:
USE_GROFF=Yes
   2010-09-22 07:44:12 by Jasper Lievisse Adriaanse | Files touched by this commit (3)
Log message:
- remove the BROKEN-mips64 markers after miod's recent softfloat commit,
python seems to be working well enough now.
   2010-09-16 16:34:08 by Federico G. Schwindt | Files touched by this commit (3)
Log message:
Update WANTLIB after ncurses update. While here remove unneeded pthread-stubs
and xcb from -tkinter.  With help from sthen@
   2010-04-15 12:35:02 by Jasper Lievisse Adriaanse | Files touched by this commit (4)
Log message:
- more BROKEN-$ARCH
   2010-04-15 08:11:02 by Antoine Jacoutot | Files touched by this commit (64)
Log message:
Consistency: remove the 1, 2 or even 3 empty blank lines.
sthen@ agrees
   2010-04-15 08:11:02 by Antoine Jacoutot | Files touched by this commit (64)
Log message:
Consistency: remove the 1, 2 or even 3 empty blank lines.
sthen@ agrees
   2010-02-25 04:02:39 by Peter Hessler | Files touched by this commit (11)
Log message:
Allow Python to build on loongson.  Bring in some libffi fixes, inspired
by jasper@'s fixes to the libffi port.
Mark mips64 (aka, sgi) as BROKEN, as the build fails.  We'll look closer
at this after unlock.
OK jasper@
ports is unlocked for a while only for those who have been informed.
   2010-02-09 05:23:59 by Jasper Lievisse Adriaanse | Files touched by this commit (19)
Log message:
- extend archtecture tests for mips64el
ok naddy@ phessler@
   2010-01-20 01:15:21 by Marc Espie | Files touched by this commit (6)
Log message:
fix update from OpenBSD 4.5 (missed @pkgpath markers at the time
-bz2, -expat, -sqlite were removed)
   2010-01-20 01:15:21 by Marc Espie | Files touched by this commit (6)
Log message:
fix update from OpenBSD 4.5 (missed @pkgpath markers at the time
-bz2, -expat, -sqlite were removed)
   2009-11-22 15:53:19 by Jasper Lievisse Adriaanse | Files touched by this commit (5)
Log message:
- minor tweaks for mips64, none of the versions fully build, but at least
they're somewhat getting there.
- with the added patch, 2.5 gets as far as 2.6, and then fails terribly.
ok djm@ (MAINTAINER)
   2009-08-10 11:31:07 by Matthias Kilian | Files touched by this commit (19)
Log message:
WANTLIB changes after xcb addition and bump.
For some unknown reason, I forgot to commit lang/*
this morning.
   2009-03-14 06:31:15 by Marc Espie | Files touched by this commit (1)
Log message:
bump for tk
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2009-01-01 14:03:28 by Damien Miller | Files touched by this commit (71)
Log message:
Updates and garbage collect all three Python ports:
2.4.4 => 2.4.8
2.5.2 => 2.5.4
2.6 => 2.6.1
Python 2.4 and 2.5 lose their build knobs to match 2.6.
Removes no longer needed Python 2.5 security patches backported
from the release25-maint SVN branch.
Remove the -bz2 subpackage from all three versions. It is silly
to make a subpackage to avoid depending on something tiny and
compatibly licensed.
Python 2.4 and 2.5 lose their -expat subpackages; expat has been
in base for some time.
Python 2.5 loses its sqlite subpackge. Again, sqlite is tiny,
compatibly licensed and is depended upon by more and more
applications. This brings it into line with the 2.6 version.
Rework all three version's handling of setup.py. Rather than regex
replacing LOCALBASE and X11BASE into setup.py post-configure, these
are passed in though environment variables. Will save hours of
frustrated cursing familiar to anyone who has accidently used the
update-patches target after configure and had to go back and redo
all the substitutions.
Rework the patching of setup.py for 2.4 and 2.5 to be more like
what we do for 2.6. I.e. keep the diff minimal and avoid deleting
huge blocks of code, so the diff has a chance of applying without
massive hand-editing each patch release.
Fix .py paths in installed .pyc files (patch from eric@)
feedback from several, particularly eric@, ajacoutot@ and Ingo
Schwarze; "get it in" ajacoutot@
   2008-10-21 14:13:07 by Steven Mestdagh | Files touched by this commit (1)
Log message:
bump pkgname after maintainer change
   2008-10-18 05:55:57 by Damien Miller | Files touched by this commit (3)
Log message:
Prepare for Python-2.6
Flip default ALL_TARGET to the one that will be used for current
and future (>=2.5) Python releases, move old default down into
2.3 and 2.4 Makefiles
Turn on a verbose retry when regress tests fail; saves messing with
LD_LIBRARY_PATH incantations to get them to rerun
Take maintainership
   2008-07-25 13:38:46 by Stuart Henderson | Files touched by this commit (1)
Log message:
bump libpython2.4 and PKGNAME for isinf()
   2007-10-25 15:05:33 by Steven Mestdagh | Files touched by this commit (15)
Log message:
db.=4 -> db.>=4  in preparation of db4 update
ok sthen@
   2007-10-16 02:22:32 by Antoine Jacoutot | Files touched by this commit (9)
Log message:
- tweak MESSAGE: force symlink creation (nothing fancy but makes it
easier when changing default python versions)
"sure" steven@
   2007-10-16 02:22:32 by Antoine Jacoutot | Files touched by this commit (9)
Log message:
- tweak MESSAGE: force symlink creation (nothing fancy but makes it
easier when changing default python versions)
"sure" steven@
   2007-10-16 02:22:32 by Antoine Jacoutot | Files touched by this commit (9)
Log message:
- tweak MESSAGE: force symlink creation (nothing fancy but makes it
easier when changing default python versions)
"sure" steven@
   2007-06-26 10:50:18 by Martynas Venckus | Files touched by this commit (6)
Log message:
documentation fix: we don't automatically create symbolic links,
also be consistant with binary names, and move rcsid to the top.
bump pkgnames.
ok steven@
   2007-06-26 10:50:18 by Martynas Venckus | Files touched by this commit (6)
Log message:
documentation fix: we don't automatically create symbolic links,
also be consistant with binary names, and move rcsid to the top.
bump pkgnames.
ok steven@
   2007-05-07 09:43:33 by Jasper Lievisse Adriaanse | Files touched by this commit (3)
Log message:
fix WANTLIB/LIB_DEPENDS
ok alek@ mbalmer@


   2007-04-28 04:06:25 by Bernd Ahlers | Files touched by this commit (6)
Log message:
Use xenocara expat.


   2007-04-28 04:06:25 by Bernd Ahlers | Files touched by this commit (6)
Log message:
Use xenocara expat.


   2007-04-05 10:20:19 by Marc Espie | Files touched by this commit (912)
Log message:
base64 checksums.


   2007-01-10 09:57:56 by Steven Mestdagh | Files touched by this commit (7)
Log message:
- update to python 2.3.6
- build python with CXX, fixes problems with extensions that use CXX
such as the py-wxWidgets problem spotted by john.danks at gmail.com
from alek@ some time ago
   2007-01-10 09:57:56 by Steven Mestdagh | Files touched by this commit (7)
Log message:
- update to python 2.3.6
- build python with CXX, fixes problems with extensions that use CXX
such as the py-wxWidgets problem spotted by john.danks at gmail.com
from alek@ some time ago
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-24 13:48:23 by Steven Mestdagh | Files touched by this commit (35)
Log message:
new MULTI_PACKAGES
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-11-01 13:38:37 by Aleksander Piotrowski | Files touched by this commit (30)
Log message:
Update to 2.4.4; add bz2 subpacakge; switch to setup.py; redo PLISTs
   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-10-10 13:08:06 by Aleksander Piotrowski | Files touched by this commit (12)
Log message:
SHARED_ONLY, part one


   2006-07-28 16:36:41 by Steven Mestdagh | Files touched by this commit (6)
Log message:
unbreak python build on 4.0, bump PKGNAMEs.
"fine" sturm@, "ok if it works" alek@


   2006-07-28 16:36:41 by Steven Mestdagh | Files touched by this commit (6)
Log message:
unbreak python build on 4.0, bump PKGNAMEs.
"fine" sturm@, "ok if it works" alek@


   2006-07-28 16:36:41 by Steven Mestdagh | Files touched by this commit (6)
Log message:
unbreak python build on 4.0, bump PKGNAMEs.
"fine" sturm@, "ok if it works" alek@


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-04-18 11:29:35 by Aleksander Piotrowski | Files touched by this commit (8)
Log message:
Update to 2.4.3


   2006-01-22 04:34:45 by Aleksander Piotrowski | Files touched by this commit (1)
Log message:
Fix build here as well


   2005-12-27 12:41:21 by Aleksander Piotrowski | Files touched by this commit (6)
Log message:
- Better RUN_DEPENDS for subpackages
- Use SHARED_LIBS
- Bump PKGNAMEs
spotted by naddy@ and sturm@
SHARED_LIBS tips from espie@


   2005-12-27 12:41:21 by Aleksander Piotrowski | Files touched by this commit (6)
Log message:
- Better RUN_DEPENDS for subpackages
- Use SHARED_LIBS
- Bump PKGNAMEs
spotted by naddy@ and sturm@
SHARED_LIBS tips from espie@


   2005-12-27 12:41:21 by Aleksander Piotrowski | Files touched by this commit (6)
Log message:
- Better RUN_DEPENDS for subpackages
- Use SHARED_LIBS
- Bump PKGNAMEs
spotted by naddy@ and sturm@
SHARED_LIBS tips from espie@


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-12-17 05:33:00 by Aleksander Piotrowski | Files touched by this commit (9)
Log message:
- Update to 2.4.2
- Enable -expat subpackage base on included libexpat sources


   2005-10-11 20:41:41 by Federico G. Schwindt | Files touched by this commit (2)
Log message:
fix bug #1019808 and bump package. maintainer@ ok.


   2005-10-11 20:41:41 by Federico G. Schwindt | Files touched by this commit (2)
Log message:
fix bug #1019808 and bump package. maintainer@ ok.


   2005-08-09 20:14:13 by Jolan Luff | Files touched by this commit (4)
Log message:
3.8-beta still has the "defining _XOPEN_SOURCE breaks shit" bug so
extend the python workaround to include 3.8 and bump pkgnames


   2005-08-09 20:14:13 by Jolan Luff | Files touched by this commit (4)
Log message:
3.8-beta still has the "defining _XOPEN_SOURCE breaks shit" bug so
extend the python workaround to include 3.8 and bump pkgnames