./sysutils/nut [UPS monitoring program supporting many brands]
[+] Add this package to your ports tracker

[ CVSweb ] [ Homepage ] [ RSS feed ]

Version: 2.7.4, Package name: nut-2.7.4
Maintained by: Stuart Henderson
Master sites:
Flavors (export FLAVOR=xyz, setenv FLAVOR xyz):
  • no_snmp
  • no_xml
Description-cgi
These CGI scripts can connect to NUT to query UPS information and
statistics and display them on a web page.

By default these scripts are designed to work within OpenBSD's chrooted
Apache webserver. If you disable the chroot feature you can use Apache's
SetEnv directive to override the configuration file location by setting
the NUT_CGICONFPATH environment variable.

Description-main
Network UPS Tools is a collection of programs which provide a common
interface for monitoring and administering Uninterruptible Power
Supply (UPS), Power Distribution Unit (PDU), and Solar Controller
Device (SCD) hardware. It uses a layered approach to connect all
of the parts.

Drivers are provided for a wide assortment of equipment. They
understand the specific language of each device and map it back to
a compatibility layer. This means both an expensive high end UPS,
a simple "power strip" PDU, or any other power device can be handled
transparently with a uniform management interface.

This information is cached by the network server upsd, which then
answers queries from the clients. upsd contains a number of access
control features to limit the abilities of the clients. Only
authorized hosts may monitor or control your hardware if you wish.
Since the notion of monitoring over the network is built into the
software, you can hang many systems off one large UPS, and they
will all shut down together. You can also use NUT to power on, off
or cycle your data center nodes, individually or globally through
PDU outlets.

Description-snmp
This NUT driver allows you to monitor UPS devices via SNMP. It automatically
detects and supports a wide range of devices by loading various MIBS, including
various Eaton, MGE, APC, Liebert, Powerware and other devices.

Description-xml
This NUT driver provides support for recent Eaton / MGE models which use
a Network Management Card or Proxy (MGE XML/HTTP protocol based), e.g.

o NMC Minislot (Ref 66102, firmware EA or newer),
o SNMP/Web Minislot card (Ref 66244)
o NMC Transverse (Ref 66074),
o NMC & Modbus/JBus (Ref 66103),
o Network Management Proxy,
o ePDU Monitored (newer version).

Older models, such as SNMP card (Ref 66062 and Ref 66045), use the SNMP
protocol and should use snmp-ups(8) from the nut-snmp package.

nut.rc
#!/bin/sh
#
# $OpenBSD: nut.rc,v 1.2 2015/11/29 15:50:20 ajacoutot Exp $

# "meta" script running the following rc.d(8) scripts with the given argument;
# note that daemon_flags, daemon_user, daemon_timeout and daemon_class are not
# passed to the child scripts.

if [ "$1" = restart ]; then
$0 stop && $0 start
exit
fi

if [ "$1" = stop ]; then
_pkg_scripts="upsmon upsd"
else
_pkg_scripts="upsd upsmon"
fi

for _i in ${_pkg_scripts}; do
if [[ -x ${RCDIR}/${_i} ]]; then
${RCDIR}/${_i} $@ || exit $?
fi
done


Filesize: 2451.007 KB
Version History (View Complete History)
  • (2016-03-12) Updated to version: nut-2.7.4
  • (2015-04-24) Updated to version: nut-2.7.3
  • (2014-04-25) Updated to version: nut-2.7.2
  • (2014-01-08) Updated to version: nut-2.7.1
  • (2012-08-15) Updated to version: nut-2.6.5
  • (2012-06-09) Updated to version: nut-2.6.4
  • (2012-01-11) Updated to version: nut-2.6.3
  • (2011-09-19) Updated to version: nut-2.6.2
  • (2011-06-02) Updated to version: nut-2.6.1
  • (2011-03-09) Updated to version: nut-2.6.0
[show/hide] View available PLISTS (Can be a lot of data)

CVS Commit History:

   2017-07-26 16:45:35 by Stuart Henderson | Files touched by this commit (937)
Log message:
bump LIBCXX/LIBECXX/COMPILER_LIBCXX ports.
   2017-07-16 13:19:06 by Marc Espie | Files touched by this commit (880)
Log message:
use COMPILER_LIBCXX where applicable
   2017-06-16 18:16:20 by Ingo Schwarze | Files touched by this commit (1)
Log message:
Output of mandoc looks better than output of groff not only in spite
of the large number of UNSUPP messages, but precisely because of them:
all those .sp requests inside tables are completely pointless and
only spew gratuitious blank lines with groff.  Besides, mandoc is
more reliable than groff with respect to the special characters
used when it comes to -Tascii output.
The about 25 broken .so files are already commented out in the
PLIST, and none of them are needed on OpenBSD, all the names are
in the NAME sections anyway.
So drop USE_GROFF and bump those three of the four subpackages
that contain manual pages.
   2017-04-10 05:46:37 by Stuart Henderson | Files touched by this commit (277)
Log message:
use LIBCXX
   2017-01-16 23:58:10 by Jeremie Courreges-Anglas | Files touched by this commit (2)
Log message:
Unbreak nut-scanner+usb, dlopen libusb.so instead of a distro-specific name
ok sthen@ (maintainer)
   2017-01-16 23:58:10 by Jeremie Courreges-Anglas | Files touched by this commit (2)
Log message:
Unbreak nut-scanner+usb, dlopen libusb.so instead of a distro-specific name
ok sthen@ (maintainer)
   2017-01-15 17:12:15 by Jeremie Courreges-Anglas | Files touched by this commit (3)
Log message:
Regen patches.
   2017-01-15 17:12:15 by Jeremie Courreges-Anglas | Files touched by this commit (3)
Log message:
Regen patches.
   2017-01-15 17:12:15 by Jeremie Courreges-Anglas | Files touched by this commit (3)
Log message:
Regen patches.
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2016-03-11 13:07:55 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to NUT 2.7.4
   2015-11-29 08:50:20 by Antoine Jacoutot | Files touched by this commit (11)
Log message:
daemon_timeout is not passed to the child scripts either.
   2015-11-29 08:50:20 by Antoine Jacoutot | Files touched by this commit (11)
Log message:
daemon_timeout is not passed to the child scripts either.
   2015-07-30 17:08:10 by Stuart Henderson | Files touched by this commit (1)
Log message:
add a defensive --without-ipmi to CONFIGURE_ARGS. currently a noop (-> no
package change), but a pending (post-5.8) update to freeipmi will cause it
to be picked up.
   2015-06-18 15:18:04 by Kirill Bychkov | Files touched by this commit (2)
Log message:
tell people to disable uhidev not uhid.
input and ok from sthen@ (MAINTAINER)
   2015-06-18 15:18:04 by Kirill Bychkov | Files touched by this commit (2)
Log message:
tell people to disable uhidev not uhid.
input and ok from sthen@ (MAINTAINER)
   2015-05-02 15:52:19 by Stuart Henderson | Files touched by this commit (3)
Log message:
Tweaks to sysutils/nut:
- Install libupsclient headers/pkgconfig files. landry@ asked about
these; they needed a --with-dev configure flag to get them installed...
- Get rid of the useless ${NUT_USER} and ${NUT_ID} SUBST_VARS which are
now getting in the way of new files in the PLIST.
- Move some files from /usr/local/share/ups to a more easily recognisable
/usr/local/share/nut.
   2015-05-02 15:52:19 by Stuart Henderson | Files touched by this commit (3)
Log message:
Tweaks to sysutils/nut:
- Install libupsclient headers/pkgconfig files. landry@ asked about
these; they needed a --with-dev configure flag to get them installed...
- Get rid of the useless ${NUT_USER} and ${NUT_ID} SUBST_VARS which are
now getting in the way of new files in the PLIST.
- Move some files from /usr/local/share/ups to a more easily recognisable
/usr/local/share/nut.
   2015-05-02 15:52:19 by Stuart Henderson | Files touched by this commit (3)
Log message:
Tweaks to sysutils/nut:
- Install libupsclient headers/pkgconfig files. landry@ asked about
these; they needed a --with-dev configure flag to get them installed...
- Get rid of the useless ${NUT_USER} and ${NUT_ID} SUBST_VARS which are
now getting in the way of new files in the PLIST.
- Move some files from /usr/local/share/ups to a more easily recognisable
/usr/local/share/nut.
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-04-23 16:38:55 by Stuart Henderson | Files touched by this commit (11)
Log message:
update to NUT 2.7.3
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-03-25 19:07:32 by Stuart Henderson | Files touched by this commit (8)
Log message:
Add an snmp-ups subdriver to NUT for Huawei, tested with UPS5000-E
Add a meta rc script that starts/stops upsd and upsmon in the right order
   2015-01-22 09:42:09 by Stuart Henderson | Files touched by this commit (2)
Log message:
Add a note that some APC devices need ugen to work with NUT.
   2015-01-22 09:42:09 by Stuart Henderson | Files touched by this commit (2)
Log message:
Add a note that some APC devices need ugen to work with NUT.
   2011-07-19 15:06:09 by Stuart Henderson | Files touched by this commit (2)
Log message:
Patch the error message when a USB device isn't found, pointing people
in the direction of permissions on the device nodes, this is a fairly
common problem when configuring NUT with a USB UPS.
   2011-07-19 15:06:09 by Stuart Henderson | Files touched by this commit (2)
Log message:
Patch the error message when a USB device isn't found, pointing people
in the direction of permissions on the device nodes, this is a fairly
common problem when configuring NUT with a USB UPS.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-06-02 04:37:08 by Stuart Henderson | Files touched by this commit (6)
Log message:
update NUT to 2.6.1; bugfixes, cleanup, improvements and new device support.
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 16:32:20 by Stuart Henderson | Files touched by this commit (7)
Log message:
- split the netxml-ups driver into a separate package (nut-xml),
as was already done with the snmp-ups driver, to reduce dependencies
for the common case
- rewrite the various DESCR files
   2011-03-09 05:55:05 by Stuart Henderson | Files touched by this commit (2)
Log message:
adjust MESSAGE to show people how to identify device nodes for USB UPS,
so they don't need to whack permissions on usb* ugen*. with aja@
   2011-03-09 05:55:05 by Stuart Henderson | Files touched by this commit (2)
Log message:
adjust MESSAGE to show people how to identify device nodes for USB UPS,
so they don't need to whack permissions on usb* ugen*. with aja@
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2011-03-09 04:00:55 by Stuart Henderson | Files touched by this commit (10)
Log message:
- update nut to 2.6.0 (major documentation revamp and support for new
devices, including APC 5G, various Eaton, HP, and Tripp Lite models,
and a number of USB HID devices)
- build the snmp package by default
- use correct user/group names in MESSAGE
   2010-11-20 10:22:46 by Marc Espie | Files touched by this commit (296)
Log message:
new depends
   2010-11-06 10:07:01 by Marc Espie | Files touched by this commit (25)
Log message:
move gettext to new WANTLIB
   2010-10-19 01:43:05 by Marc Espie | Files touched by this commit (132)
Log message:
USE_GROFF=Yes
   2010-10-03 16:21:50 by Stuart Henderson | Files touched by this commit (2)
Log message:
- new-style WANTLIB/LIB_DEPENDS/REVISION
- sync WANTLIB
- suggest suitable group for serial ports in MESSAGE
- take MAINTAINER
   2010-10-03 16:21:50 by Stuart Henderson | Files touched by this commit (2)
Log message:
- new-style WANTLIB/LIB_DEPENDS/REVISION
- sync WANTLIB
- suggest suitable group for serial ports in MESSAGE
- take MAINTAINER
   2010-06-26 05:11:12 by Stuart Henderson | Files touched by this commit (2)
Log message:
Note in MESSAGE that the _nut user must have permission to access the
relevant device nodes if using a USB UPS. Suggested by Alexey Suslikov.
   2010-06-26 05:11:12 by Stuart Henderson | Files touched by this commit (2)
Log message:
Note in MESSAGE that the _nut user must have permission to access the
relevant device nodes if using a USB UPS. Suggested by Alexey Suslikov.
   2010-04-15 08:29:18 by Antoine Jacoutot | Files touched by this commit (91)
Log message:
Consistency: remove the 1, 2 or even 3 empty blank lines.
sthen@ agrees
   2010-04-15 08:29:18 by Antoine Jacoutot | Files touched by this commit (91)
Log message:
Consistency: remove the 1, 2 or even 3 empty blank lines.
sthen@ agrees
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-31 16:11:11 by Stuart Henderson | Files touched by this commit (15)
Log message:
update to 2.4.3, tested by Denny White and Aaron Stellman
note that with USB UPS, you may have to allow permissions on
further ugen subdevices (e.g. ugen0.01 as well as ugen0.00).
   2010-03-20 11:11:40 by Antoine Jacoutot | Files touched by this commit (4)
Log message:
Use gettext module.
Correctly install _ups user and group.
Add better defaults config.
looks ok to sthen@
   2010-03-20 11:11:40 by Antoine Jacoutot | Files touched by this commit (4)
Log message:
Use gettext module.
Correctly install _ups user and group.
Add better defaults config.
looks ok to sthen@
   2010-03-20 11:11:40 by Antoine Jacoutot | Files touched by this commit (4)
Log message:
Use gettext module.
Correctly install _ups user and group.
Add better defaults config.
looks ok to sthen@
   2010-03-20 11:11:40 by Antoine Jacoutot | Files touched by this commit (4)
Log message:
Use gettext module.
Correctly install _ups user and group.
Add better defaults config.
looks ok to sthen@
   2010-03-03 13:39:16 by Stuart Henderson | Files touched by this commit (2)
Log message:
fix the path in a sample config file.
ok jasper@
   2010-03-03 13:39:16 by Stuart Henderson | Files touched by this commit (2)
Log message:
fix the path in a sample config file.
ok jasper@
   2010-01-15 04:25:15 by Stuart Henderson | Files touched by this commit (4)
Log message:
from upstream repository;
* base the default maxconn on available filehandles.
* change the error message to better indicate that it's an error
not a warning.
ok jasper@
while there, remove an out-of-date comment in MESSAGE-main.
   2010-01-15 04:25:15 by Stuart Henderson | Files touched by this commit (4)
Log message:
from upstream repository;
* base the default maxconn on available filehandles.
* change the error message to better indicate that it's an error
not a warning.
ok jasper@
while there, remove an out-of-date comment in MESSAGE-main.
   2010-01-15 04:25:15 by Stuart Henderson | Files touched by this commit (4)
Log message:
from upstream repository;
* base the default maxconn on available filehandles.
* change the error message to better indicate that it's an error
not a warning.
ok jasper@
while there, remove an out-of-date comment in MESSAGE-main.
   2010-01-15 04:25:15 by Stuart Henderson | Files touched by this commit (4)
Log message:
from upstream repository;
* base the default maxconn on available filehandles.
* change the error message to better indicate that it's an error
not a warning.
ok jasper@
while there, remove an out-of-date comment in MESSAGE-main.
   2009-09-15 11:37:22 by Jasper Lievisse Adriaanse | Files touched by this commit (83)
Log message:
remove marc balmer as maintainer of all of his ports, to take away the
illusion marc still maintains them. as requested by himself.
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2009-04-03 09:40:12 by Stuart Henderson | Files touched by this commit (7)
Log message:
update to 2.4.1, code cleanup and adds support for a bunch of new
UPS and also now preliminary support for PDUs.
ok mbalmer (maintainer),
"commit and we fix in-tree if i run into issues" henning
   2008-11-13 06:15:07 by Antoine Jacoutot | Files touched by this commit (1)
Log message:
- fix WANTLIB after neon update
   2008-09-27 11:30:08 by Martynas Venckus | Files touched by this commit (3)
Log message:
- add neon to LIB_DEPENDS, so that netxml driver always builds
- upsimage.cgi used upsimage_cgi_LDFLAGS to tweak for -all-static,
and not *_LDADD as upsstats.cgi and upsset.cgi did.  as a result
upsimage.cgi was linked dynamically, therefore broken inside chroot
- add USE_GMAKE, so that it builds on landisk
- make lib-depends-check happy
- add @bin marker for bin/snmp-ups
- bump all PKGNAMEs
ok sthen@
   2008-09-27 11:30:08 by Martynas Venckus | Files touched by this commit (3)
Log message:
- add neon to LIB_DEPENDS, so that netxml driver always builds
- upsimage.cgi used upsimage_cgi_LDFLAGS to tweak for -all-static,
and not *_LDADD as upsstats.cgi and upsset.cgi did.  as a result
upsimage.cgi was linked dynamically, therefore broken inside chroot
- add USE_GMAKE, so that it builds on landisk
- make lib-depends-check happy
- add @bin marker for bin/snmp-ups
- bump all PKGNAMEs
ok sthen@
   2008-09-27 11:30:08 by Martynas Venckus | Files touched by this commit (3)
Log message:
- add neon to LIB_DEPENDS, so that netxml driver always builds
- upsimage.cgi used upsimage_cgi_LDFLAGS to tweak for -all-static,
and not *_LDADD as upsstats.cgi and upsset.cgi did.  as a result
upsimage.cgi was linked dynamically, therefore broken inside chroot
- add USE_GMAKE, so that it builds on landisk
- make lib-depends-check happy
- add @bin marker for bin/snmp-ups
- bump all PKGNAMEs
ok sthen@
   2008-09-26 13:00:58 by Martynas Venckus | Files touched by this commit (2)
Log message:
Apapche -> Apache.  ok wcmaier@
   2008-09-26 13:00:58 by Martynas Venckus | Files touched by this commit (2)
Log message:
Apapche -> Apache.  ok wcmaier@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-09-08 13:38:30 by Martynas Venckus | Files touched by this commit (9)
Log message:
update to nut-2.2.2, which contains the old agiler driver from 2.2.0
(now called agiler-old)
upses such as the below can now work again:
{0x0665, 0x5161, &agiler_old_subdriver},        /* Belkin F6C1200-UNV */
{0x06da, 0x0003, &agiler_old_subdriver},        /* Mustek Powermust */
{0x0f03, 0x0001, &agiler_old_subdriver},        /* Unitek Alpha 1200Sx *
ok sthen@
   2008-02-03 11:06:41 by Matthias Kilian | Files touched by this commit (3)
Log message:
Bring back static CGIs.
Load config files from /etc/nut.
ok mbalmer@
   2008-02-03 11:06:41 by Matthias Kilian | Files touched by this commit (3)
Log message:
Bring back static CGIs.
Load config files from /etc/nut.
ok mbalmer@
   2008-02-03 11:06:41 by Matthias Kilian | Files touched by this commit (3)
Log message:
Bring back static CGIs.
Load config files from /etc/nut.
ok mbalmer@
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2008-01-30 13:55:59 by Marc Balmer | Files touched by this commit (13)
Log message:
Update to nut ver. 2.2.1.
requested by and ok henning
   2007-10-02 03:21:50 by Stuart Henderson | Files touched by this commit (1)
Log message:
add missing /, fixing -snmp
ok mbalmer@ (maintainer)
   2007-09-15 15:14:03 by Michael Erdely | Files touched by this commit (110)
Log message:
Remove surrounding quotes in COMMENT-*/PERMIT_*/IGNORE
   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-05-18 06:22:46 by Henning Brauer | Files touched by this commit (12)
Log message:
update to 2.0.5 + a fix to make bcmxcp work correctly again
partially from and ok mbalmer


   2007-04-05 11:26:27 by Marc Espie | Files touched by this commit (815)
Log message:
more base64 checksums


   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-11-25 12:36:43 by Marc Espie | Files touched by this commit (7)
Log message:
new MULTI_PACKAGES
   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-05-03 11:32:09 by Henning Brauer | Files touched by this commit (8)
Log message:
update to nut-2.0.3, last not leas bringing many format string fixes
preserve my changes to the fentonups driver, allowing the detection logic
to be bypassed and a model to be forced - for UPSes that do implement the
protocol except the identification command, which seems to be somewhat common
the Xanto S3000R thing here behaves like that, and support for it is added
ok mbalmer


   2006-04-27 13:46:24 by Marc Balmer | Files touched by this commit (3)
Log message:
Suport an additional device.
from henning


   2006-04-27 13:46:24 by Marc Balmer | Files touched by this commit (3)
Log message:
Suport an additional device.
from henning


   2006-04-27 13:46:24 by Marc Balmer | Files touched by this commit (3)
Log message:
Suport an additional device.
from henning


   2005-10-23 23:14:13 by Federico G. Schwindt | Files touched by this commit (2)
Log message:
fix more breakage and regen plist. sturm@ ok.


   2005-10-23 23:14:13 by Federico G. Schwindt | Files touched by this commit (2)
Log message:
fix more breakage and regen plist. sturm@ ok.


   2005-09-16 03:51:28 by Marc Espie | Files touched by this commit (53)
Log message:
Fix a buglet in bsd.port.mk where the PSEUDO_FLAVORS get encoded into
the FULLPKGPATH, thus providing changes to packing-lists which shouldn't
happen, and making update more difficult.
Accordingly, bump all pkgnames with PSEUDO_FLAVORS, and provide an
update @pkgpath for the bug for most of them (left out the ones with 3
or 4 pseudo flavors for space constraints...)


   2005-09-16 03:51:28 by Marc Espie | Files touched by this commit (53)
Log message:
Fix a buglet in bsd.port.mk where the PSEUDO_FLAVORS get encoded into
the FULLPKGPATH, thus providing changes to packing-lists which shouldn't
happen, and making update more difficult.
Accordingly, bump all pkgnames with PSEUDO_FLAVORS, and provide an
update @pkgpath for the bug for most of them (left out the ones with 3
or 4 pseudo flavors for space constraints...)


   2005-06-03 13:46:43 by Marc Balmer | Files touched by this commit (1)
Log message:
Take maintainership.


   2005-06-03 11:47:00 by Michael Coulter | Files touched by this commit (1)
Log message:
typo and spelling fixes


   2005-03-14 18:57:06 by David Berghoff | Files touched by this commit (100)
Log message:
typo and wording fixes; approved by pval
ok mbalmer@ "that diff was fun to read"


   2005-01-05 10:29:43 by Christian Weisgerber | Files touched by this commit (94)
Log message:
SIZE


   2004-12-20 07:39:16 by Marc Espie | Files touched by this commit (1)
Log message:
remove shit


   2004-12-20 03:35:37 by Aleksander Piotrowski | Files touched by this commit (57)
Log message:
Add WANTLIB markers


   2004-10-28 11:20:05 by Aleksander Piotrowski | Files touched by this commit (1)
Log message:
Don't hardcode /etc
ok naddy@


   2004-10-13 12:59:33 by Dan Harnett | Files touched by this commit (34)
Log message:
initial sweep for MESSAGE decoration removal; ok espie@


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-10-02 21:13:10 by Marc Matteo | Files touched by this commit (6)
Log message:
More PLIST updates... clean up the Makefile a bit and add an optional
-snmp SUBPACKAGE.
Also, remove myself as MAINTAINER.  Not that I won't continue to support
it, just that my shinny new(?) SNMP card for my UPS makes this port
not one I'll use everyday anymore.
See what happens when people give me free stuff :).


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-26 21:10:24 by Marc Matteo | Files touched by this commit (24)
Log message:
Update to the 2.0 tree of Nut.
This is a feature release so if you're upgrading, take a look at the
release notes here:
http://random.networkupstools.org/source/2.0/new-2.0.0.txt


   2004-09-18 07:11:38 by Marc Espie | Files touched by this commit (5)
Log message:
new style conflicts


   2004-09-15 12:39:34 by Marc Espie | Files touched by this commit (72)
Log message:
new plists


   2004-09-15 12:39:34 by Marc Espie | Files touched by this commit (72)
Log message:
new plists


   2004-02-20 23:16:58 by Marc Matteo | Files touched by this commit (1)
Log message:
Ok, actually commit the changes to user.list this time.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2004-02-08 23:48:48 by Marc Matteo | Files touched by this commit (26)
Log message:
Update to 1.4.1.
In addition to the standard bugfixes, this is a major port rewrite.
The port now uses a '_ups' user and the CGIs created can now run under
either chrooted Apache or non-chrooted Apache.


   2003-12-15 14:55:58 by Christian Weisgerber | Files touched by this commit (479)
Log message:
remove WWW lines


   2003-12-15 14:55:58 by Christian Weisgerber | Files touched by this commit (479)
Log message:
remove WWW lines


   2003-10-22 18:30:02 by Christian Weisgerber | Files touched by this commit (6)
Log message:
/usr/local -> ${PREFIX}
From: Xavier Santolaria <xavier@santolaria.net>


   2003-03-30 09:19:25 by Marc Matteo | Files touched by this commit (5)
Log message:
Handle SYSCONFDIR properly and make this compile on vax (and probably the
other NO_SHARED_ARCHS as well).


   2003-03-30 09:19:25 by Marc Matteo | Files touched by this commit (5)
Log message:
Handle SYSCONFDIR properly and make this compile on vax (and probably the
other NO_SHARED_ARCHS as well).


   2003-03-30 09:19:25 by Marc Matteo | Files touched by this commit (5)
Log message:
Handle SYSCONFDIR properly and make this compile on vax (and probably the
other NO_SHARED_ARCHS as well).


   2003-03-30 09:19:25 by Marc Matteo | Files touched by this commit (5)
Log message:
Handle SYSCONFDIR properly and make this compile on vax (and probably the
other NO_SHARED_ARCHS as well).


   2003-03-30 09:19:25 by Marc Matteo | Files touched by this commit (5)
Log message:
Handle SYSCONFDIR properly and make this compile on vax (and probably the
other NO_SHARED_ARCHS as well).


   2003-02-26 08:13:04 by David Krause | Files touched by this commit (14)
Log message:
necessary is spelled necessary.
similar is spelled similar.
functionality is spelled functionality.
ok brad@ jmc@


   2003-02-26 08:13:04 by David Krause | Files touched by this commit (14)
Log message:
necessary is spelled necessary.
similar is spelled similar.
functionality is spelled functionality.
ok brad@ jmc@


   2003-01-18 11:29:27 by Marc Matteo | Files touched by this commit (1)
Log message:
Missing patch from last commit, oops.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2003-01-16 23:23:43 by Marc Matteo | Files touched by this commit (7)
Log message:
Update to 1.2.1, a substantial update from 1.0.0.
Changes are listed here:
http://www.exploits.org/nut/release/1.2/new-1.2.1.txt
ok sturm@
Note: the initial checkin aborted half way through, before any log
messages were generated.  What you see here is the second half of the
commit, the first half is already in-tree.


   2002-10-28 12:53:44 by Christian Weisgerber | Files touched by this commit (20)
Log message:
No regression tests available.


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@


   2002-10-14 10:14:33 by Marc Matteo | Files touched by this commit (24)
Log message:
* Update to 1.0.0
* CGIs are now a SUBPACKAGE and work with chrooted Apache
* Make myself MAINTAINER
* Mark conflict with upad-2.0
ok naddy@ and nate@